Strautmann Aperion 2101, Перевод оригинальной инструкции по эксплуатации

Страница: 135 / 197

Service and maintenance of machine
Aperion 2101, Aperion 2401, Aperion 3401 04.18 135
Every six months
•
Check the following components at the electro-hydraulic forced steering axle system SES
(optional extra):

The angle sensor linkage for mechanical damage, corrosion, wear, contamination and
clearance. Have damaged parts immediately replaced by an authorised workshop.

The steering cylinders for oil leakage at the piston rod seal and scores in the piston rods.
Clean the piston rods from contamination.

The linkage of the steering cylinders for corrosion and firm seating. Have damaged parts
immediately replaced by an authorised workshop.

The hydraulic block for corrosion and oil leakage at the screwed connections. Have
corroded parts immediately replaced by an authorised workshop.
•
Check all components of the bogie chassis for damage and wear (visual check).
•
Have the spring clamps at the supporting axle of the bogie chassis checked for firm seating
(shop work!).
•
Have the axle connection at the spring tension casings of the Bogie chassis checked for firm
seating (shop work!).
•
Check the bearing bolts at the spring tension casings of the bogie chassis for firm seating. Have
them retightened if necessary (shop work!).
Every 500 service hours or once a year
•
Check frame and drawbar for cracks.
•
Clean the filter elements of the compressed-air brake system depending on the operating
conditions.
•
Have the hydraulic hose pipes checked for their operational safety by an expert.
•
Check the hydraulic filter for contamination (observe the cleaning indicator!).
•
Read out the fault memory of the electro-hydraulic forced steering axle system SES and have
malfunctions remedied by an authorised workshop.
Every 1000 service hours, then every 2000 service hours
•
Change the oil in the feed gearing.
•
Change the oil in the angular gear of the beaters (optional extra).
Every 2 years
•
Have the hydraulic oil changed and the return-flow and pressure filter elements replaced by an
authorised workshop.
•
Relieve the conveyor tension.