Strautmann Aperion 2101, Перевод оригинальной инструкции по эксплуатации

Страница: 94 / 197

Commissioning
94 Aperion 2101, Aperion 2401, Aperion 3401 04.18
Fig. 52
1.

Couple the shell (1) of the drawgear and align tractor and machine in a straight line.
2.

Couple the ball socket (2) of the forced steering axle.
During initial commissioning:

Set the steering rod such that the left-hand edge of the lever (3) is positioned in one line
with the right-hand edge of the orientation notch (5) if tractor and machine are in one line.
3.

Couple the propeller shaft.
4.

Connect the hydraulic system.
5.

Connect the brake system.
6.

Connect the control set with the power supply of the tractor.
7.

Switch the tractor ignition on.
The steering computer boots and carries out a power-up test, checking the SES system for
proper functioning.
Preconditions for proper execution of the power-up test:
•
Coupled forced steering axle,
•
connected hydraulic system and sufficient hydraulic pressure
(minimum 15 bar),
•
power supply of control set,
•
switched-on ignition of tractor,
•
with tridem chassis: a lowered lift axle,
•
stop of tractor and machine; if the combination of tractor and
machine moves, the power-up test will be stopped and
restarted when the movement stops.