Strautmann Aperion 2101, Перевод оригинальной инструкции по эксплуатации

Страница: 98 / 197

Commissioning
98 Aperion 2101, Aperion 2401, Aperion 3401 04.18
Couple after emergency braking:
1. Connect the brake hose to the tractor.
2. Set the brake control valve at the tractor such that the hydraulic oil can flow back to the tractor.
3. Press the drain valve (7) at the emergency brake valve (3).

The hydraulic oil flows back to the tractor and the pressure accumulator (4) is depressurised.
4. Insert the ripcord (1) with the clip connector into the borehole of the operating lever.
5. Set the operating lever back to its initial position.
6. Actuate the brake system of the machine several times.

The pressure accumulator (4) is filled and the emergency brake valve (3) is ready for operation
again.
5.8.5 Couple propeller shaft
1.

Clean and lubricate the p.t.o. shaft on the
tractor.
2.

Hitch the machine to the tractor.
3.

Check whether the p.t.o. shaft has been
switched off.
4.

Slip the locking mechanism of the propeller
shaft onto the p.t.o. shaft of the tractor until
it noticeably engages. When coupling the
propeller shaft, observe the included
operating instructions for the propeller
shaft.
5.

Secure the propeller shaft guard at the
tractor and at the machine against rotating
by means of the clip chains (1):

Fix the clip chains at right angles to
the propeller shaft if possible.
Fig. 57

Fix the clip chains such that a
sufficient swivelling range of the
propeller shaft is ensured in any
operating state. Clip chains must not
get entangled in tractor or machine
components.
6. Ensure that there is enough free space
around the propeller shaft in any operating
state. Insufficient free space will lead to
damage to the propeller shaft.
Fig. 58