Safety instructions
Aperion 2101, Aperion 2401, Aperion 3401 04.18
57
•
People are not allowed:
within the turning and swivelling range of movable machine parts,
within the discharge area of the machine,
within the operating/hazardous area of the machine,
beneath lifted and unsecured movable machine parts,
on the transport floor as long as the tractor engine is running.
•
Avoid sudden changes of direction when travelling uphill and downhill and when traversing hills
(risk of tipping over!).
•
Only actuate powered machine parts if people keep sufficient safe distance to the machine!
•
Safely support folded-up covers before standing underneath them!
•
Immediately switch the tractor's p.t.o. shaft off in case of a response of the overload clutch.
•
Secure the tractor against accidental starting and rolling before leaving it!
For this purpose,
apply the parking brake of the tractor,
turn the tractor engine off,
pull the ignition key out.
3.4.1.3
Transport journeys
•
Observe the respective national road traffic regulations when travelling on public roads!
•
Before carrying out transport journeys, check
the supply lines for proper connection,
the lighting system for damage, proper functioning and cleanliness,
the brake and hydraulic system for visible defects,
whether the parking brake has been completely released,
the brake system for proper functioning.
•
Always ensure sufficient steerability and braking ability of the tractor!
Machines attached or hitched to a tractor and front or tail weights influence the driving
characteristics as well as the steerability and the braking ability of the tractor.
•
Use front weights if necessary!
The tractor's front axle load must never fall below 20 % of the tractor's empty weight, in order to
ensure sufficient steerability.
•
Always properly fix front or tail weights to the fixing points provided for this purpose!
•
Observe the maximum loading capacity of the attached / hitched machine and the admissible
axle and tongue loads of the tractor! Run the machine being only partly filled if necessary.
•
The tractor must ensure the required deceleration for the charged combination (tractor and
attached / hitched machine)!
•
Check the braking effect before starting the journey!
•
Observe the broad overhang and the flywheel mass of the machine when cornering with
attached or hitched machine!
•
Set all swivelling machine parts to transport position before carrying out transport journeys, in
order to avoid dangerous movements. Use the transport locks provided for this purpose!
Содержание Aperion 2101
