Strata CIX 200, Руководство по программированию

Страница: 500 / 508

Software and Firmware Updates
IP Telephone, MIPU, GIPU, LIPU and BIPU Firmware Update Procedures
B-8
Strata CIX Programming Vol.1 12/09
5. From Data Directory box enter: CTXIPUPDATE.
6. From File Name box enter the software update file name.
7. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
• It can take one to five minutes to update the IPT.
• If an error occurs, recheck file names, locations, etc., then try again.
To check the IP telephone firmware version directly from an IP telephone
1. Simultaneously press the 369Hold buttons on the IP Telephone.
2. At the SELECT = prompt, press 1 then press Hold
3. At the Select function key prompt, press FB01 , the IP telephone will be displayed.
4. To exit this mode, go off and on hook.
Update From an FTP Directory on the Network eManager PC
Prerequisites
1. Install the “File Transfer Protocol (FTP) Service” component under “Internet Information Services” on
the eManager PC. This is not installed by default when installing IIS in Windows XP or 2000. See “To
create a Virtual FTP directory on the Network eManager PC” below.
2. Create an FTP virtual directory and path to C:\CTX\eManager\CTXIPUPDATE. The drive letter must
be the drive on which Network eManager is installed. This can be done automatically by running the
“CreateFTPVdir” executable file provided by Toshiba. See
“To create a Virtual FTP directory on the
Network eManager PC” below.
To create a Virtual FTP directory on the Network eManager PC
Setup the Virtual FTP server function on the Network eManager PC for IP Updates. These procedures
were written using Microsoft Windows XP, there may be some variance when using Windows 2000.
1. Install the MS Windows component FTP on your PC.
Using the Windows XP or 2000 professional installation CR-ROM, install the FTP Service on the
Network eManager PC. To verify FTP Service is installed, it should be located under: Control Panel >
Administrative Tools > Internet Information Services (IIS).
2. Go to CTXIpScripts and run “CreateFTPdir.” This creates a virtual directory.
To get the “CreateFTPVdir” file go to C:\ctx\eManager\CTXIpScripts.
Download the IP Firmware files and store them on the Network eManager PC
1. Download the appropriate firmware update files from TSD FYI, click Technical Services > Software
(Strata Systems) > CTX IP Firmware.
2. Copy the firmware update files to the CTXIPUPDATE folder on the eManager PC
(C:\ctx\eManager\CTXIPUPDATE\. These files will be accessed during the IP update processes.
Notes
•
Make sure the Network eManager PC is not connected directly to the CIX processor network jack (see
the figure below).
Make all connections through the network (see the figure below).
•
Make sure the IP Telephones have the same subnet address as the CIX and Network eManager - both
must be in the same domain.