Strata CIX 200, Руководство по программированию

Страница: 472 / 508

Applications Guide
Networking Multiple Voice Mail Systems
A-4
Strata CIX Programming Vol.1 12/09
•
field 05 Client IP 1-4 No. = 192.168.254.250
•
field 06 Client Port No. = 5000
•
field 07 Read Retry No. = 1
•
field 08 Write Retry No. = 1.
•
field 09 CallerName Set To CSTA = No
4. Click Submit .
Step 2:
Set up Remote CIX
1. Select System > Voice Mail Port Data. Program 580 – VM Port Data displays.
2. Enter the appropriate fields.
3. Select Station > Station Assignments. Program 200 – Station Data screen displays.
4. Enter the Prime DN. For Call Record, enter the Node ID and Pilot number of the local CIX (where the
voice mail is located).
5. In field 20 – VM MW Center Port. For Remote CIX systems, assign message center including Node IP
for CIX Proprietary Integration integration. This parameter enables Call Record function too.
Note Refer to “Voice Mail Set Up” on page A-1 for regular voice mail set up.
Step 3:
Set up Strata Net Between All Nodes
Use the following programs to set up Strata Net:
1. “304, 305 Incoming Line Group” on page 6-1 .
2. “306, 307 Outgoing Line Groups” on page 6-5 .
3. “302, 303 Strata Net (PRI) and Strata Net IP (QSIG)” on page 6-30
4. “102 Flexible Access Codes” on page 4-3
5. “651 Private Routing Plan Analysis” on page 9-34
6. “653 Private Route Choice Table Assignment” on page 9-35
7. “654 Private Route Definition Table Assignment” on page 9-35
8. “655 Private Network Digit Modification Table Assignment” on page 9-36
9. “656 Node ID Assignment” on page 9-33
For all other voice mail set up steps refer to “Voice Mail Set Up” on page A-1 .