Strata CIX 200, Руководство по программированию

Страница: 360 / 508

Services
Destination Restriction/Least Cost Routing
9-10
Strata CIX Programming Vol.1 12/09
Destination Restriction Guide Page
Use the Destination Restriction (DR) guide pages to program Destination Restriction.
1. Click LCR/DR > DR Guide Page.
The Destination Restriction Guide Page opening screen displays.
2. Click on any Program number to start using the Guide page.
Note Every Guide Page has Back and Next buttons to help you navigate to the previous and next
programs in a group.
The Program at the end of a group has a Guide Page button instead of a Next button to take you to
the main Destination Restriction Guide Page.
DR Dialing Setup
Program 530 – DR/LCR Screening table.
Use this program to define special dialing codes that are normally dialed in front of telephone numbers
(example *82, *67). It defines what DR and LCR action should be applied after users dial the special
code (Bypass or Skip and Apply DR).
Programs 531 / 650 – Centrex/PBX DR Screening table.
Use this program to define Centrex/PBX line access codes. It defines what DR action should be applied
after users dial the Centrex/PBX line access code (Bypass” or Skip and Apply DR). It is also used to
assign OLG to this table and/or enable Centrex assume 9 dialing.
Program 117 – Public Dial Plan Digit Analysis.
Use this program to prevent standard telephone users from avoiding DR by sending DTMF tones to the
PSTN before DR analysis is complete. In LCR applications, it allows calls to cut through to the PSTN
immediately so users do not have to wait for a pause timer to cut through after dialing a number.
DR Digit Table Setup
Programs 111 / 532 / 533 / 534 – DRL Assignments.
Use this screen to define Destination Restriction tables for each DRL. It combines the following
programs into a single screen for viewing, editing and copying DR tables.
111 - Used to define if the DRL allows credit card calling or not.
532 - Used to define each DR table as an Allow or Deny table.
533 - Used to add or delete digit strings from DR Exception Tables and copy selected digit strings from
one DR Exception table to another DR Exception table.
534 - Used to add or delete digit strings from DR Exception Tables and copy selected digit strings from
one DR Exception table to another DR Exception Table.