Storm Century S-LSA, Руководство по обслуживанию

Страница: 139 / 142

MAINTENANCE MANUAL
STORM Century S-LSA
STORM Century S-LSA STORMAIRCRAFT
Both polyurethane enamel and the epoxy primer that sandwiches the film to the surface are catalyzed
materials.They should be mixed and used within six hours. If they are not applied within this time, they
will not have the full gloss
because of the reduced flow time. If it is impossible to spray all of the polyurethane within the six-hour
time period, careful addition of reducer can add a couple of hours to the useful life of the material.
The catalysts used for these primers and finishes are highly reactive to moisture, and the cans should
be recapped immediately after using. If a can of the catalyst is allowed to remain open for a period of
time, and is then resealed, the moisture in the can will activate it, and swell it up so much there is danger
of the can bursting. High humidity and/or heat accelerate the cure.
All catalyzed material must be removed from the pressure pot, the hose, and the gun, immediately upon
completion of the spraying operation, and the equipment thoroughly washed. If any of this material is
allowed to remain overnight, it will solidify and ruin the equipment.
NOTE:
Polyurethane may be injurious to your health. Wear proper safety equipment and clothing.