Stoll CompactLine FC 150 H, Руководство по эксплуатации

Страница: 11 / 96

B58FC1 0000000094 EN 002 10
SAFETY
2.5 Proper use
The CompactLine front loader is a mounted implement for agricultural and forestry tractors and is
designed and intended solely for:

Mounting on tractors with the front loader mounting kit approved by STOLL (see 3.6 Attaching it to
the tractor ),

Use with work implements specified by STOLL, which are suitable for the respective loading work
(see
6.5 Picking up and putting down the implement and operating instructions for the implement),

Use and operation within the defined limits (see 11 Technical specifications ),

Control from the driver's seat.
The front loader may only be operated when it is in perfect condition. If faults impair safety, these must
be promptly repaired by an authorised specialist workshop.
The front loader must not be used in work processes and with implements that require the presence of
people close to the load when the front loader is in the raised position! This kind of work is only permitted
if the front loader is equipped with an anti-lowering guard (see
4.6 Anti-lowering guard ).
The front loader and its implements must not be operated simultaneously with other hydraulic
equipment on the tractor.
Proper use also includes reading and observing the operating instructions, the associated additional
instructions, the other applicable documents as well as the safety information. To ensure operational
safety, prescribed maintenance work as well as intervals and conditions for care and service must also
be observed. Any use other or beyond those described in the manual is considered as improper use.
Foreseeable misuse
Avoid the following:
 Exceeding of the permissible axle load and the permissible total weight of the tractor
 Use outside of the conditions and prerequisites that are specified in the technical manuals and
documents
 Transport of persons
 Transport of loads that are not intended for use with front loaders
 Transport of loads in road traffic
 Transport of unsecured loads (e.g. stone pallets)
2.6 Operational limits
 The following operating conditions and requirements on the operational environment must be
observed:

If applicable, temperature range for proper operation of the tractor (see operating instructions of the
tractor)

Sufficient load capacity of the tires and the front axle of the tractor