Stoll CompactLine FC 150 H, Руководство по эксплуатации

Страница: 87 / 96

B58FC1 0000000094 EN 002 86
TECHNICAL SPECIFICATIONS
11 Technical specifications
11.1 Dimensions and weights
11.2 Noise emissions
The emission sound pressure level is less than 70 dB(A) (depending on the tractor).
Front loader Nominal width
1
Lifting arm length
2
Nominal lifting force Weight
5
[mm] [mm] Bottom
3
[daN] Top
4
[daN] [kg]
FC 150 L 835 1400 525 425 105
FC 150 H 1400 525 425 145
FC 150 P 1400 525 425 165
FC 250 L 945 1590 640 540 160
FC 250 H 1590 640 540 185
FC 250 P 1590 640 540 205
FC 350 H 1700 950 790 210
FC 350 P 1700 950 790 230
FC 450 H 1840 970 920 250
FC 450 P 1840 970 920 270
FC 550 H 2000 1170 1120 270
FC 550 P 2000 1170 1120 290
1
Measured from the centre of the pillar to the centre of the pillar.
2
Measured from the lifting arm pivot point to the implement pivot point.
3
Mathematically determined lifting force in the implement pivot point with hydraulic pressure at 170 bar, lifting arm in
completely lowered position and ideal typical mounting. Since the geometry of the actual mounting parts must also take the
specific geometry of different tractor equipment (tire sizes, axles, etc.) into account, the actual values in individual cases may
vary significantly.
4
Like
3
, but with the lifting arm completely raised
5
Typical weight without implement, without special equipment. Deviations in individual cases are possible.
6
The nominal lifting force is reached at the implement pivot point of the front loader, and although it accounts for the net weight
of the front loader, it does not account for the weight of the implement. The actual lifting force of the front loaders decreases
with increasing distance from the implement pivot point to the front.