background image

13

      B58FC1 0000000094 EN 002

SAFETY

Dangers during packaging and transport

Dangers during assembly for initial operation

Dangers when mounting and dismounting the front loader

There is a risk of injury due to crushing, impacts or pinching if the front loader tips over or 
falls from the lifting gear.

During all preparatory work, always ensure a secure stand of the machine.

Assisting persons must be instructed to exit the immediate danger area under the 
front loader.

There is a risk of accidents during transport of the front loader if it is not correctly loaded 
and secured.

The front loader must be correctly secured and transported.

There is a risk of injury when lifting and handling heavy machine parts as well as bulky 
components of the front loader.

Heavy and bulky machine parts may only be lifted with the assistance of a second 
person.

Avoid back injuries by lifting correctly.

There is a risk of injury when the front loader tips over during mounting or dismounting or 
when the parked front loader tips over due to a lack of stability.

Ensure the stability of the front loader and the tractor.

Observe the instructions and sequence in these operating instructions for proper 
mounting and dismounting of the front loader.

Check the proper locking of the front loader.

There is a risk of crushing of limbs when operating the parking supports to park the front 
loader, especially on uneven ground.

Observe the instructions and sequence in these operating instructions for proper 
operation of the parking supports.

Содержание CompactLine FC 150 H

































































































Отзывы: