B58FC1 0000000094 EN 002
28
STRUCTURE
3.6
Attaching it to the tractor
The front loader is attached to the tractor using the mounting kit for tractors. The mounting kit consists
of the following components:
Fig. 10 Mounting kit for tractors
Legend
1
Front guard left and right
2
Mounting parts left and right
3
Mountings/catch hooks
The components remain permanently mounted on the tractor. They can look different depending on the
tractor model.
Observe the installation instructions for the mounting kit.
Observe the regulations for the registration of the changed empty weight in the vehicle documents
for the tractor.
The assembly of the mounting kit may only be performed by an authorised specialised workshop.
3.7
Change frame
The change frame is a fixed component of the front loader. The different types are designed and
adapted for the mounting of standardised implements of this type.
As a matter of principle, the following change frames are available for FC 150-550 H and P front loaders:
Skid-steer change frame
Euro change frame (not for FC 150)
The change frames will be presented without implements in the following.
B0A6
1
1
2
2
3
3
1
1
2
2
