background image

11

      B58FC1 0000000094 EN 002

SAFETY

2.7

Basic safety information

The basic safety information comprises all safety measures grouped by theme and is applicable at all
times. In addition, the information is presented as warning notices at the correspoding positions in these
operating instructions.

Basic dangers

Mechanical dangers

Mortal danger exists when persons are lifted or carried with the front loader. The front 
loader is not equipped with the necessary safety equipment to be used as a work cage. 

It is forbidden to lift or transport people with the front loader.

There is a risk of crushing and impact of the upper and lower limbs due to projecting or 
protruding frame parts and moving components of the machine.

Personnel must be instructed in the proper use of the machine and in the location 
and types of danger.

Instruct persons to exit the danger and movement areas of the machine.

Wear suitable protective gear, if necessary, when performing service tasks.

There is a lethal risk of crushing and injury due to accidental movements of the tractor, 
the front loader, and the implements.

Instruct unauthorised persons to exit the danger and action area of the machine.

Assistance from a second person for loading activities should only be allowed when 
the front loader is lowered, provided that an anti-lowering guard is not installed.

For loading work as well as when mounting and dismounting the front loader, 
ensure that the tractor is standing on level and solid ground.

The front loader may only be operated from the driver's seat of the tractor.
Operating elements outside of the tractor must not affect the front loader! In 
particular, the operating elements of the front linkage must not affect the front 
loader!

The front loader must only be operated by one person.

There is a lethal risk of injury due to exceeding of the maximum permissible load or with 
improper use of the front loader resulting in breaking of the front loader or its 
components.

Observe the load limits specified in the technical data.

When levelling or pushing snow, do not drive faster than 10 km/h.

Work only with mounted and locked implement.

Observe the load capacity of the tyres and the front axle of the tractor.

Содержание CompactLine FC 150 H

































































































Отзывы: