B58FC1 0000000094 EN 002
20
SAFETY
Position
Description
1a
Re-tighten all the fixing screws on the mounting kit after the first 5 hours of operation.
1b
Do not stand under the raised front loader.
1c
Do not stack several loads on top of each other.
1d
Only use suitable implement to prevent the load from falling down.
1e
Increased risk of tilting when the front loader is raised.
1f
Do not lift or transport persons with the front loader.
1g
Keep a safe distance away from electrical lines.
2a
Observe the operating instructions.
2b
Only use suitable implement to prevent the load from falling down.
2c
Do not stack several loads on top of each other. Check the inclination of the implement.
2d
Do not lift or transport persons with the front loader.
2e
Do not stand in the working area of the front loader.
2f
Keep a safe distance away from electrical lines.
2g
Keep a distance of at least 4 m from electrical high-voltage lines.
2h
Do not stand under the raised front loader.
2i
Increased risk of tilting when the front loader is raised.
2j
Be careful of hydraulic oil under high pressure.
3a
Observe the operating instructions.
3b
Do not stand in the working area of the front loader. Possible danger due to loads falling down.
4
Only park the front loader with attached implement with a minimum weight of 70 kg.
5a
The front loader is lowered when the Comfort Drive is switched on.
5b
Lever position to switch on the Comfort Drive.
5c
Lever position to switch off the Comfort Drive.
6
The pressure accumulator is under pressure from the gas and oil. Parts should only be removed and repaired
according to the instructions in the installation instructions.
7
Mounting points for crane transport of the front loader.
