55
B58FC1 0000000094 EN 002
OPERATION
6.3
Operating the hydraulic couplings
6.3.1
Operating the plug-in coupling
Connecting plugs with couplings:
(1) Remove the caps and wipe the coupling if necessary.
(2) Insert the connector in the couplings.
(3) Stick the caps together to prevent soiling.
The plug-in couplings are connected.
Disconnecting the plugs from the couplings:
(1) Pull out the plugs from the couplings.
(2) Put on the caps.
The plug-in couplings are disconnected.
6.4
Operating the implement locking mechanism
6.4.1
Operating the mechanical implement locking mechanism on skid-steer change frames
⚠
WARNING
Risk of injury due to implements falling down!
The implement may fall down if the implement locking mechanism is open or not locked correctly. This
can cause serious injury to persons standing in the surrounding area.
Only actuate the implement locking mechanism when the implement is set down on the ground or
on a secure rack.
Always check that the implement is correctly locked.
⚠
CAUTION
Risk of crushing due to spring tension!
There is spring tension on the handle of the implement locking mechanism, which closes the locking
mechanism when the handle is lifted. Improper use can lead to injury to hands and fingers.
Always operate the handle with one hand and grab it in the middle.
