Stoll CompactLine FC 150 H, Руководство по эксплуатации, Страница: 70 / 96

69 B58FC1 0000000094 EN 002
OPERATION
6.5.5 Putting down implements with manual PinON implement locking mechanism
⚠
CAUTION
Risk of crushing due to hydraulic cylinders swivelling down!
Pulling out the pin from the hydraulic cylinder and the implements causes the hydraulic cylinder to fall
on the front loader bar due to its own weight. As a result, this can crush hands and fingers.

While pulling out the pin, hold the hydraulic cylinder firmly and put it down slowly.

Do not put your hands between the front loader and the implement cylinder when the pin is being
pulled out.
Putting down the implement:
(1) Position the implement horizontally and
lower the front loader until it is just above the
ground.
Do not lower the front loader all the way to
the ground, otherwise the connection pins
are blocked and cannot be pulled out.
(2) Switch off the tractor.

Apply the parking brake.
 Stop the engine.
 Depressurize the hydraulic system.
or
With the implement function actuated,
move the operating lever in the lateral
end positions in order to depressurize the
implement hydraulic system
(see
6.1 Operating elements ).
(3) If necessary, disconnect the hydraulic lines
of the implement from the couplings of the
switch valve for the 3rd control circuit
(see
6.3 Operating the hydraulic couplings ).
(4) Disconnect the implement from the hydraulic
cylinders in the top pin holes.
 With the help of another person, swivel or
relieve the implement so that the pins are
not blocked and can be pulled out.

Remove the screw with circlip from the
pin.

Pull out the pin.
Fig. 74 Positioning the implement for putting down
B0BX
Fig. 75 Pulling out the pin
B0BU