Stoll CompactLine FC 150 H, Руководство по эксплуатации

Страница: 64 / 96

63 B58FC1 0000000094 EN 002
OPERATION
(10) If applicable, connect the hydraulic lines of
the implement with the front loader
couplings.
 Lower the front loader until the implement
is level on the ground.
 Depressurize the hydraulic system.
or
With the implement function actuated,
move the operating lever in the lateral
end positions in order to depressurize the
implement hydraulic system (see
6.1 Operating elements ).
 Connect the hydraulic lines of the
implement to the couplings of the switch
valve for the 3rd control circuit.
(11) For implements from other manufacturers:
carefully swivel the implement to all end
positions, to ensure that the implement does
not collide with the front loader.
 The implement is mounted and ready for
operation.
6.5.2 Picking up implements with mechanical implement locking mechanism on Euro change frames
⚠
WARNING
Risk of injury due to implements falling down!
The implement may fall down if the implement locking mechanism is open or not locked correctly. This
can cause serious injury to persons standing in the surrounding area.

Only actuate the implement locking mechanism when the implement is set down on the ground or
on a secure rack.

Always check that the implement is correctly locked.
⚠
CAUTION
Risk of crushing due to spring tension!
There is spring tension on the handle of the implement locking mechanism, which closes the locking
mechanism when the handle is lifted. Improper use can lead to injury to hands and fingers.

Always operate the handle with one hand and grab it in the middle.
Mounting the implement:
(1) Open the implement locking mechanism
(see 6.4.2 Operating the mechanical
implement locking mechanism on Euro
change frames
).
Fig. 59 Coupling the control circuit
B0AZ
Fig. 60 Opening the implement locking mechanism
B088