Still GX-Q Скачать руководство пользователя страница 13

Страница: 13 / 100

Foreword

Safe-keeping and passing on

• These operating and maintenance instruc-

tions must be kept safely so that the opera-

tor always has access to them.

• Documents can be ordered retrospectively.

Please give the ID or the order number.

• If the truck is sold on, the complete docu-

mentation should be passed on along with

the truck.

rights

This manual - and any excerpts thereof - may

not be reproduced, translated or tansmitted in

any form to third parties without the express

written permission of the manufacturer.

Operator, form of address

Our products are suitable for use by male

or female operators. If applicable in your

language, however, these instructions use

only the masculine form of address to simplify

the text"."
The dimensions of the operator’s compart-

ment on our trucks are designed in accor-

dance with standard DIN EN ISO 3411 and

are accordingly constructed for both female

and male operators. This standard also stipu-

lates ranges within which the operator’s body

weight and dimensions should lie. If these

trucks are operated by persons (male or fe-

male) who do not meet these criteria, the fol-

lowing effects must be considered:

5220 804 2501 [EN]

Содержание GX-Q





































































































Результаты поиска

Содержание GX-Q

Отзывы:

Бренды по названию

Популярные бренды

Still GX-Q, Оригинальное руководство пользователя

Результаты поиска

Содержание GX-Q

Отзывы:

Бренды по названию

Популярные бренды