Still GX-Q Скачать руководство пользователя

Страница: 47 / 100

Operation

Daily commissioning

Check the access control
• The key must be able to be removed and

it must not be possible to operate the truck

when the key is in the O position or when it

is removed.

• In electronic access control*: in the event

of access being blocked, the truck must not

able to be operated.

Check the load-carrying equipment and the

connecting elements
• The forks must not have cracks.
• The forks must not be bent.
• The forks must not show more than 10%

wear as a result of grinding.

• The fork safety device* must be in working

order. The locking bolt must be standard

and self-locking.

• The fork carriage must not be bent.
• The condition, wear, voltage and lubrication

of the load chains must be checked.

• Load chains must not be damaged.
Check the drive wheel and the load wheels
• Examine all wheels for foreign objects.
• Visually check the condition of the drive

wheel and load wheels.

• Monitor the drive wheel and load wheels for

unusual sounds during operation.

Other checks
• Check the overhead guard for deformation,

damage and cracks at welded seams.

• Visually check the overhead guard cover*.
• Visually check the guard grille*.
• The horn and other warning units must

function correctly.

• If lighting devices are ﬁtted, check that they

function correctly.

• Check that the battery lock is in perfect

condition and functions correctly.

• In equipment with options or special equip-

ment, check the condition and functionality

of these in the same way.

*Option

5220 804 2501 [EN]

Содержание GX-Q





































































































Результаты поиска

Содержание GX-Q

Отзывы:

Похожие инструкции для GX-Q

Бренды по названию

Популярные бренды

Still GX-Q, Оригинальное руководство пользователя

Результаты поиска

Содержание GX-Q

Отзывы:

Похожие инструкции для GX-Q

Бренды по названию

Популярные бренды