Steris AMSCO 400 Series, Руководство оператора

Страница: 59 / 174

5-23
Component Identification Operator Manual P129394-020
4. Complete – The automated generator drain ball valve closes at
end of flush.
• If Auto Utility mode is enabled, the generator chamber fills
and begins heating water at time of day utilities are set to
restart.
• If Manual Utility mode is enabled:
» If flush begins while sterilizer is in Standby mode at
scheduled time, sterilizer returns to Standby when flush
is complete. Utilities restart when operator selects ON to
leave standby screen.
» If flush began from main menu screen, sterilizer returns
to main cycle screen and utilities restart immediately.
NOTE: If sterilizer is in-cycle at scheduled flush time, a
flush cycle automatically occurs when sterilization cycle is
completed. Unload items from chamber then close door
to aid in depressurize phase.
• Approximately 10 – 15 minutes are required to build a head
of steam suitable for running a sterilization cycle.
Important: After removing load(s) from the chamber, close the
chamber door and keep the chamber door closed to minimize utility
consumption.
STATUS . .FLUSH 0:00 4
TEMP . . .00 F
PRESS . . .00 inHg
GENERATOR FLUSH
PROJECTED CYCLE COMPLETION TIME:
05:00
MINUTES SECONDS
PAPER STATUS
FEED PRINT
ABORT