Star Micronics Star futurePRNT TSP100GT Скачать руководство пользователя страница 168

Страница: 168 / 173

Software Manual

163

7. Restrictions and Cautions

Below is the restrictions and cautions for this version.

Please read through and have well understanding before use.

■ Emulation: Star Line mode

- Barcode Printing when Horizontal Compress & Two Color Printing is selected.

In this case, please do not print Barcode and Text within the same line.

Barcode maybe printed on the texts.

- Barcode Printing when Vertical & Horizontal Compress is selected.

Barcode will not be compressed vertically & horizontally.

Text and Bit Image printed on the same line will not be compressed either.

- Barcode Printing when Vertical & Horizontal Compress and Copy function is selected.

In this case, the Barcode on the copied receipt will be compressed and will be unreadable by

Barcode Scanner.

Please do not use the Barcode on the copied receipt.

(The Barcode on the original receipt can be read by Barcode Scanner)

- Code 39 Barcode(Option: Extended)

In this version, Extended setting for Code 39 Barcode cannot be used.

Code 39 Barcode will not be printed on the appropriate position.

- Print via Printer Driver

You cannot use the following functions of the TSP100 Configuration Application when "NoCut" is

set in the printer driver property settings.

- Copy function

- Vertical Monut Mode

- On demand printing

- The "Do Checked Block Printing" funciton in OPOS and JavaPOS is not supported with the

TSP100LAN.

■ Emulation: ESC/POS mode

- ITF Barcode

Please do not print HRI characters when the Bearer Bars is selected as "Rendered" for ITF Barcode.

Depending on the barcode width, Barcode may not be printed correctly.

- Bit Image Printing when 48 columns for print column is selected.(Default 42 columns)

Under this setting, below command handles up to 42 columns (68mm)

<ESC> "*" / <GS> "v" / <GS> "/"

Please do not send Bit Image data larger than 68mm in width.

- Cash drawer #2 function

Driven ON/OFF timeing for Cash Drawer #2 is fixed to 0.2 sec.

Содержание Star futurePRNT TSP100GT














































































































































































Результаты поиска

Содержание Star futurePRNT TSP100GT

Отзывы:

Похожие инструкции для Star futurePRNT TSP100GT

Бренды по названию

Популярные бренды

Star Micronics Star futurePRNT TSP100GT, Руководство пользователя программного обеспечения

Результаты поиска

Содержание Star futurePRNT TSP100GT

Отзывы:

Похожие инструкции для Star futurePRNT TSP100GT

Бренды по названию

Популярные бренды