Star Micronics Star futurePRNT TSP100GT Скачать руководство пользователя страница 15

Страница: 15 / 173

Software Manual

(5) The TSP100LAN Ethernet Setup Tool screen is displayed.

If the printer you want to install is not listed in the LAN printer list, click

[Discovery]

The factory network settings of the TSP100LAN printer are as follows.

IP address:

0.0.0.0 (Unassigned)

Subnet mask:

0.0.0.0 (Unassigned)

Default gateway: 0.0.0.0 (Unassigned)

Use DHCP:

ENABLE (Selected)

If at least one of the following conditions applies, you will not be able to configure an IP address for

any printers (with factory default settings) which have no IP address assigned.

- Using F/W V.2.0 or older
- Using CD Vol. 5.4 or older

Before starting operations, specify the IP address for the printer, referring to "

Chapter 6 Guideline

for Using Ethernet Environment

Содержание Star futurePRNT TSP100GT














































































































































































Результаты поиска

Содержание Star futurePRNT TSP100GT

Отзывы:

Star Micronics Star futurePRNT TSP100GT, Руководство пользователя программного обеспечения, Страница: 15 / 173

Результаты поиска

Содержание Star futurePRNT TSP100GT

Отзывы: