background image

Silhouette Alta®

Print Head Replacement Procedure

Preparation

Alta machine
Used print head
Replacement unit

Tools

Needle-nose pliers
Hex wrench (M3) (included in the Alta box)

Remove the print head

5.  Remove the M3 screws with the hex wrench.

6.  Remove the connector. Pinch the side of the connector and pull 

up 

(DO NOT PULL THE WIRE)

.

7.  Remove the joint screws (3 pieces).

7.1  Hold the nut piece in place with the needle-nose pliers.
7.2  Remove the screw with the hex wrench.

8.  Remove the print head.

4.  Remove the hose.

4.1  Push the collar down.
4.2  Pull the hose.

1.  Remove the filament and wait for the print head to cool.
2.  Remove the build plate.
3.  Move the print head to the bottom of the platform. Adjust the 

print head position so that it rests in the center.

Отзывы: