Stannah MIDILIFT XL PLUS, Руководство по обслуживанию

Страница: 29 / 37

Midilift XLplus
Maintenance Guide
Jan 2014 Issue 4
29
16.4 COP and rear wall removed
- To access behind the rear wall, firstly the COP must be removed (
4.2 Cabin operating panel (COP)
removed, pg 4)
-
Once removed the COP trim can be taken out (
Figure 11 - COP trim being removed
). Fixings on the trim’s
can easily be accessed.
-
Using a suitable rated set of suction cups, lift the mirror upwards and remove. The weight of the individual
mirror is approximately 7kg.
- Remove upper mirror channel.
- In the last stage the whole wall can be taken out in one assembly. Shown below is a wall from a custom
cabin (wallboard, dado rail and handrail).
- Lift the wall upward and out of the aluminium extrusion.
- Pull wall assembly towards user and drop down out of top aluminium extrusion.
- To reassemble wall and COP reverse instruction.
Figure 11 - COP trim being removed Figure 12 – Rear wall being removed