Stannah MIDILIFT XL PLUS, Руководство по обслуживанию

Страница: 10 / 37

Midilift XLplus
Maintenance Guide
Jan 2014 Issue 4
10
9.4 Name plate
•
Required standard
Name plate must be securely fixed and clearly show place of manufacture, CE mark, Lift job number and product
name (XL Plus).
Also clearly within the cabin should be the lifts working load. For a standard XL Plus lift, this will be 400kg. If in
doubt of the working load ask.
•
Required action
It is legally required to have above details indicated. If this is not in place consult with customer and supervisor
about the possibility of taking the lift out of service.
9.5 Car fixtures
•
Required standard
The security of handrails and mirrors should be in good condition with no sharp edges.
•
Required action
Make safe any condition likely to cause harm.
9.6 Car walls
•
Required standard
All walls should be secure and free from any damage. Pay particular attention to glass panels to check for any
cracks or scratches.
•
Required action
If there are any gaps in the car walls or damage to the walls that cannot be repaired immediately, then consult
customer and report to supervisor that the lift may have to be removed from service, with details of suggested
remedial work.
9.7 Floor levels
•
Required standard
As part of EN81-41 2009, the lift must stop within
± 10mm of floor level.
•
Required action
If floor levels are not within the required tolerance, remedial action must be taken. If floor levels cannot be attained,
then an immediate report to supervisor is required, with suggested remedial works. If floor levels required cannot
be achieved due to older or inadequate equipment, make note on report.
To reset the floor levels reference the XLplus wiring diagram usually contained within the upper landing controller.
9.8 Emergency equipment
•
Required standard
Alarm must work and be audible to others with lift electrical supply off. Emergency lighting must work when
electrical supply to the lift is isolated. This can be achieved using the lift isolator switch situated within a 5m radius
of the upper floor.