Standard Horizon ECLIPSE Скачать руководство пользователя страница 94

Страница: 94 / 98

STANDARD HORIZON Limited Warranty

Limited Warranty is valid only in the country/region where this product was originally purchased.

On-line Warranty Registration:

Thank you for buying STANDARD HORIZON products! We are confident your new radio will serve your needs

for many years! Please register your product at

www.standardhorizon.com

- Owner’s Corner

Warranty Terms:

Subject to the Limitations of the Warranty and the Warranty Procedures described below, YAESU MUSEN

hereby warrants this product to be free of defects in materials and workmanship in normal use during the “War-

ranty Period.” (the “Limited Warranty”).

Limitations of Warranty:

A. YAESU MUSEN is not liable for any express warranties except the Limited Warranty described above.

B. The Limited Warranty is extended only to the original end-use purchaser or the person receiving this product

as a gift, and shall not be extended to any other person or transferee.

C. Unless a different warranty period is stated with this YAESU product, the Warranty Period is three years from

the date of retail purchase by the original end-use purchaser.

D. The Limited Warranty is valid only in the country/region where this product was originally purchased.

E. During the Warranty Period, YAESU MUSEN will, at its sole option, repair or replace (using new or refur-

bished replacement parts) any defective parts within a reasonable period of time and free of charge.

F. The Limited Warranty does not cover shipping cost (including transportation and insurance) from you to us,

or any import fees, duties or taxes.

G. The Limited Warranty does not cover any impairment caused by tampering, misuse, failure to follow instruc-

tions supplied with the product, unauthorized modifications, or damage to this product for any reasons, such

as: accident; excess moisture; lightning; power surges; connection to improper voltage supply; damage

caused by inadequate packing or shipping procedures; loss of, damage to or corruption of stored data; prod-

uct modification to enable operation in another country/purpose other than the country/purpose for which

it was designed, manufactured, approved and/or authorized; or the repair of products damaged by these

modifications.

H. The Limited Warranty applies only to the product as it existed at the time of the original purchase, by the

original retail purchaser, and shall not preclude YAESU MUSEN from later making any changes in design,

adding to, or otherwise improving subsequent versions of this product, or impose upon YAESU MUSEN any

obligation to modify or alter this product to conform to such changes, or improvements.

I. YAESU MUSEN assumes no responsibility for any consequential damages caused by, or arising out of, any

such defect in materials or workmanship.

J. TO THE FULLEST EXTENT PERMITTED BY LAW, YAESU MUSEN SHALL NOT BE RESPONSIBLE FOR

ANY IMPLIED WARRANTY WITH RESPECT TO THIS PRODUCT.

K. If the original retail purchaser timely complies with the Warranty Procedures described below, and YAESU

MUSEN elects to send the purchaser a replacement product rather than repair the “original product”, then

the Limited Warranty shall apply to the replacement product only for the remainder of the original product

Warranty Period.

L. Warranty statutes vary from state to state, or country to country, so some of the above limitations may not

apply to your location.

Warranty Procedures:

1. To find the Authorized STANDARD HORIZON Service Center in your country/region, visit www.standardho-

rizon.com. Contact the STANDARD HORIZON Service Center for specific return and shipping instructions,

or contact an authorized STANDARD HORIZON dealer/distributor from whom the product was originally

purchased.

2. Include proof of original purchase from an authorized STANDARD HORIZON dealer/distributor, and ship

the product, freight prepaid, to the address provided by the STANDARD HORIZON Service Center in your

country/ region.

3. Upon receipt of this product, returned in accordance with the procedures described above, by the STAN-

DARD HORIZON Authorized Service Center, all reasonable efforts will be expended by YAESU MUSEN to

cause this product to conform to its original specifications. YAESU MUSEN will return the repaired product

(or a replacement product) free of charge to the original purchaser. The decision to repair or replace this

product is the sole discretion of YAESU MUSEN.

Other conditions:

YAESU MUSEN’S MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR

THE PRODUCT. IN NO EVENT SHALL YAESU MUSEN BE LIABLE FOR LOSS OF, DAMAGE TO OR COR-

RUPTION OF STORED DATA, OR FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAM-

AGES, HOW EVER CAUSED; INCLUDING WITHOUT LIMITATION TO THE REPLACEMENT OF EQUIP-

MENT AND PROPERTY, AND ANY COSTS OF RECOVERING, PROGRAMMING OR REPRODUCING ANY

PROGRAM OR DATA STORED IN OR USED WITH THE YAESU PRODUCT.

Some Countries in Europe and some States of the USA do not allow the exclusion or limitation of incidental or

consequential damages, or a limitation on how long an implied warranty lasts, so the above limitation or exclu-

sions may not apply. This warranty provides specific rights, there may be other rights available which may vary

between countries in Europe or from state to state within the USA.

This Limited Warranty is void if the label bearing the serial number has been removed or defaced.

Содержание ECLIPSE



































































































Результаты поиска

Содержание ECLIPSE

Отзывы:

Похожие инструкции для ECLIPSE

Бренды по названию

Популярные бренды

Standard Horizon ECLIPSE, Руководство пользователя

Результаты поиска

Содержание ECLIPSE

Отзывы:

Похожие инструкции для ECLIPSE

Бренды по названию

Популярные бренды