Standard Horizon ECLIPSE, Руководство пользователя

Страница: 77 / 98

75
4. Press the [▲] or [▼] key to select the desired key
function, then press the [ ENTER ] soft key.
Refer to the next page for available functions.
BACK ENTER
KEY SELECTION
NONE
WX/CH
SCAN
DW/TW
5. Repeat steps 3 and 4 to assign up to 6 functions.
6. To exit this MENU and return to radio operation press the [
BACK ] soft key.
Available functions are:
DISPLAY SOFT KEY ICON FUNCTION
SOFT KEY NUMBERS
ASSIGNED AS DEFAULT
(See the previous page.)
NONE − − −
WX/CH
Switches channels between
weather and marine
01
(GX1400GPS, GX1400)
SCAN
Turns the scanning function
ON or OFF
05
SCAN MEMORY
Add or remove channels
from memory channel scan
04
DW/TW
Starts and stops dual watch
or triple watch scan
06
PRESET
Programs or deletes the pre-
set memory channel
10
(GX1400GPS, GX1400)
01
(GX1400GPS/E)
TX HI/LO Selects transmit power 02
Selecting How Long the Soft Keys are Shown
1. [
]

“ SETUP ”

“ CONFIGURATION ”

“ SOFT KEY ”
2. Press the [▲] or [▼] key to select “ KEY TIMER ”,
then press the [
SELECT
] soft key.
BACK SELECT
SOFT KEY
KEY ASSIGNMENT
KEY TIMER
3. Press the [▲] or [▼] key to select how long the
soft key icon will be shown on the display after a
soft key is pressed, then press the [ ENTER ] soft
key.
4. The showing time can be set to “ 3 sec ”, “ 5 sec ”,
“ 7 sec ”, “ 10 sec ”, or “ 15 sec ”.
BACK ENTER
KEY TIMER
3 sec
5 sec
7 sec
10 sec
5. To exit this MENU and return to radio operation press the [ BACK ] soft key.