Standard Horizon ECLIPSE, Руководство пользователя

Страница: 28 / 98

26
4. Press the [▲] or [▼] key to select the setting item,
then press the [ SELECT ] soft key.
BACK SELECT
DSC SETUP
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK
INDIVIDUAL RING
5. Press the [▲] or [▼] key to select the desired setting.
6. Press the [ ENTER ] soft key to store the selected
setting.
7. Press the [ CLR ] key to return to radio operation.
(The display can also be returned to the previous
screen by pressing the [ BACK ] soft key.)
BACK SELECT
INDIVIDUAL DIR.
ADD
EDIT
DELETE
The same operation process as the above is written as follows in this opera-
tion manual.
[ ]

“ SETUP ”

“ CONFIGURATION ”

“ DSC SETUP ”
9.6 SIMPLEX/DUPLEX CHANNEL USE
Refer to the VHF MARINE CHANNEL CHART (page 81) for instructions on
use of simplex and duplex channels.
NOTE
9.7 CHANNEL GROUP
Set the Channel Group according to the region:
1. [
]

“ SETUP ”

“ CHANNEL SETUP ”

“ CHANNEL GROUP ”
2. Press the [▲] or [▼] key to select desired channel
group “ USA ”, “ INTL ”, or “ CAN ”*
1
.
*1: In the European version, when setting the region,
the selected European Channel Group will be
displayed instead of “CAN”. For details, refer to
the note on the setting the region on the separate
yellow insert sheet.
BACK ENTER
CHANNEL GROUP
USA
INTL
CAN
3. Press the [ ENTER ] soft key to store the selected setting.
4. Press the [ CLR ] key to return to radio operation.
Refer to the “ 13 CHANNEL ASSIGNMENTS ” (page 104) for allocated channels
in each mode.
All channels are factory-programmed in accordance with International,
Industry Canada (Canada), and FCC (USA) regulations. Mode of op-
eration cannot be altered from simplex to duplex or vice-versa.