Standard Horizon ECLIPSE, Руководство пользователя

Страница: 64 / 98

62
DSC Test Call by Manually Entering an MMSI
1. [
]

“ DSC ”

“ TEST CALL ”

“ NEW ID ”
2. Press the [▲] or [▼] key to scroll through numbers,
0 to 9.
BACK SELECT FINISH
NEW ID
MMSI:
3 --------
3. Press the [ SELECT ] soft key to store the number
and step to the next digit to the right.
4. Repeat steps 2 and 3 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the
[◄] or [►]
key repeatedly until the wrong number is highlighted, then press the [▲]
or [▼] key to correct the entry.
5. After the ninth number has been entered, press the [
FINISH
] soft key.
6. Press the [ YES ] soft key to transmit the test signal.
TEST CALL
366901555
CATEG: SAFETY
Transmit a Call?
YES NO
7. After the DSC test call is transmitted, the trans-
ceiver waits for a reply from the radio which was
called, and the display will show “ WAITING FOR
ACK
”.
To transmit again, press the [ RESEND ] soft key.
TEST CALL
366901555
CATEG: SAFETY
SINCE: 00:05
[Waiting for ACK]
RESEND QUIT
8. When an acknowledgement signal is received, the
display will show “ Received ACK ”.
TEST CALL
366901555
CATEG: SAFETY
SINCE: 00:05
[ Received ACK ]
QUIT
9. Press the [ QUIT ] soft key to return to the radio operation.
10.10.2 Receiving a DSC Test Call
When another vessel transmits a DSC test call to the
transceiver, the radio automatically reply an acknowl-
edgement. The display shows the MMSI or the name
of the vessel transmitting the DSC test call.
RX TEST CALL
YAESU
DSC TEST REPLY
SINCE: 00:05
[ Transmitted ]
QUIT
Press the [ QUIT ] soft key to return to radio operation.