Standard Horizon ECLIPSE, Руководство пользователя

Страница: 70 / 98

68
11.2.2 Weather Alert (USA version only)
This selection is used to enable or disable the NOAA Weather Alert function.
1. [
]

“ SETUP ”

“ CHANNEL SETUP ”

“ WEATHER ALERT ”
2. Press the [▲] or [▼] key to select “ ON ” or “ OFF ”.
BACK ENTER
WEATHER ALERT
OFF
ON
3. Press the [ ENTER ] soft key to store the selected
setting.
4. Press the [ CLR ] key to return to radio operation.
11.2.3 Multi Watch
Allows selection of the dual and triple watch functions.
Refer to section “
9.9 MULTI WATCH (TO PRIORITY CHANNEL) ” for details.
11.2.4 Scan Memory
To be able to scan channels the radio must be programmed. This section allows
channels to be stored in scan memory.
Refer to section “
9.10.2 Programming Scan Memory ” for details.
11.2.5 Scan Type
This selection is used to select the scan mode between “ MEMORY SCAN ”
and “ PRIORITY SCAN ”.
Refer to section “ 9.10.1 Selecting the Scan Type ” for details.
11.2.6 Scan Resume
This selection is used to select the time the transceiver waits after a transmis-
sion ends before the radio start to scan channels again.
1. [
]

“ SETUP ”

“ CHANNEL SETUP ”

“ SCAN RESUME ”
2. Press the [▲] or [▼] key to select the desired
resume time.
BACK ENTER
SCAN RESUME
1 sec
2 sec
3 sec
4 sec
3. Press the [ ENTER ] soft key to store the selected
setting.
4. Press the [
CLR
] key to return to radio operation.