VX-3R Mods
VX-3 Mars/Cap
Yaesu VX-3 Mars/Cap mod is as simple as removing the resistor under the little black sticker (center of the window on the upper
region of the lower circuit board) & doing a hard reset.
This resistor is brown and is oriented vertically with contacts top/bottom.
Note:
Some have a black resistor but the mod work the same.
Reset is:
Microprocessor Reset on Page 128 of the Manual kills all memories and settings
Power Off
Hold [MODE] + [V/M] and Power On
Press [F/W]
VX-3R TX WIDEBAND 120-220 & 300-576Mhz MODS
YAESU VX-3R TX WIDEBAND 120-220 & 300-576Mhz
THIS MOD COME FORM VARIOUS SOURCE ON THE NET.
THIS MOD CAN CHANGE THE "COUNTRY MODE" OF YOUR RIG BUT KEEP IN MIND THAT REGULATORY OF STATES
ARE PRESERVED, SO YOUR RIG WILL ACT DIFFERENT FROM WHAT YOU EXPECT. ALSO REMEMBER THAT THE
KEYBOARD LABELS CAN NOT REFLECT ACTUAL FUNCTIONS.
1. Set mode 19-CWID to AH028M
-power on, then press and hold SET to go to SET function
-turn the dial to 19-CWID
-press SET and turn to ON
-press V/M to text enter screen
-dial one character by one, press V/M for next character, to set it
to AH028M, press 2 more V/M to leave text enter screen
-press SET to go back to SET function
2. Power off
3. Press and hold both MODE key and TXPO key, then power on
4. You will not see voltage screen this time. Instead there are
KB2LJJ Radio Mods Database and Manuals
http://www.kb2ljj.com/data/yaesu/VX-3R.htm
1 dari 2
06/11/2009 19:29
