WIRED RECEIVER
44
6 - measured voltage values (DC)
7 - measured voltage values (AC)
8 - scroll bar (when all wires are tested relative to the cable shield)
Available actions:
using the PANORAMA mode for the analysis of signals in the connected pair of wires;
the Electronic Switch setup.
Controls:
Button
Action
Tabular cursor move (choice of pair of wires)
F1, ENTER
Turning on PANORAMA mode
ESC, MODE
Go to the Analyzer main menu
FUNC
Turning on SWITCH SETTING mode
F2, F3, F4
Are not used
To select a pair of wires, you need to set the tabular cursor on the corresponding row in the
table and press the "F1" or "ENTER". The screen displays the spectrogram in the selected pair of
wires. The Electronic Switch is configured in accordance with
5.2.10. LOW-CURRENT CABLE TESTING FEATURES
Testing of low-current cables is carried out by analogy to item 5.2.3–5.2.8. Additionally, it is
possible to use the Electronic Switch. Spectrogram when testing a pair ("3-6") is shown in Fig. 49.
Fig.49
In Fig.49:
1 - WR is on
2 - the connected pair of wires
3 - exit to the main menu
