CONNECTING TO WIRE LINES
14
2.2.2. CONNECTING TO LAN CABLES EQUIPPED WITH RJ45 SOCKETS
When testing LAN cables, without the need for parallel connection of terminal devices,
connection of the main unit to the PC socket is made by means of a patch cord
(Fig.1, item 20)
.
The scheme of connection is shown in Fig.5, 2C option.
If test assumes parallel connection of terminal devices, for connection it is necessary to use:
patch cord
(Fig.1, item 20)
RJ45 splitter
(Fig.1, item 12)
The scheme of connection is shown in
Fig.5, 2D option.
Fig.5
2.3. CONNECTING TO THE TELEPHONE CABLE
Telephone cables can be equipped with RJ11 plugs or RJ11 sockets.
2.3.1. CONNECTING TO THE TELEPHONE CABLE EQUIPPED WITH RJ11 PLUG
In the case when there is no need for parallel connection of terminal devices (telephone set or
fax), the main unit is connected to the telephone cable with a patch cord equipped with RJ11 plug
(Fig.1, item 21)
through the RJ11 socket
(Fig.1, item 13)
.
The scheme of connection is shown in
Fig.6, 3A option.
If test assumes parallel connection of terminal units (telephone or fax), are used:
patch cord
(Fig.1, item 21)
;
RJ11 splitter
(Fig.1, item 11)
;
RJ11 socket
(Fig.1, item 13)
.
The scheme of connection is shown in
Fig.6, 3B option.
Fig.6
