GENERAL INFORMATION
11
1.4. POWER SUPPLY
The operation of the Analyzer is allowed only from the built-in accumulator.
A fully charged accumulator provides the Analyzer operation for 3 hours.
The accumulator charge level is shown
in the Information line (Fig.22, item 3)
on the screen.
The accumulator is charged using the charger
(Fig.1, item 2)
.
To do this, insert the charger plug into the connector (Fig.2, item 8) on a side panel of the
Analyzer and connect the charger to the 220 V / 50 Hz power mains.
Charging is followed by a red luminescence
of the indicator of connection of the charger
on a side bar of the Analyzer.
Full charge time is not more than 5 hours. When charging is complete, the indicator changes
from red to green.
It is forbidden to charge the accumulator during operation of the Analyzer!
