ST Group SPIDER ST 301 Скачать руководство пользователя страница 39

Страница: 39 / 121

WIRED RECEIVER

In Fig.43:

1  -  difference spectrum obtained during the last measurement cycle (lilac color)
2  -  difference spectrum obtained in previous measurement cycles (claret color)
3  -  indicator of DIFFERENTIAL mode turning on (light field of the "F3")

Available actions:



signal analysis at a fixed frequency;



search for signals in the AUTOMATED mode;



gain setting (x1, x2, x4);



possibility of using an attenuator (20 dB).

Controls:

Button

Action

Spectrogram scaling

Marker move

Turning on AUTOMATED mode

Turning on DIFFERENTIAL mode

Turning on/off an attenuator. GAIN SETTING (x1, x2, x4)

ENTER

Turning on SIGNAL ANALYSIS AT A FIXED FREQUENCY

ESC, MODE

Go to the Analyzer main menu

FUNC, F1

Are not used

For the mode turning off (return to the PANORAMA mode)

press "F3". The field of the "F3" will

become more dark.

Changes to the span and attenuator settings made in the DIFFERENTIAL mode are saved when

exit to the PANORAMA mode.

5.2.5. SIGNAL ANALYSIS AT A FIXED FREQUENCY

The function is designed to study signals in the PANORAMA mode or in the DIFFERENTIAL

mode and allows to tune to the frequency of the detected signal, listen to the demodulated signal
and examine it using an oscilloscope.

Turning on is carried out from the PANORAMA mode or from the DIFFERENTIAL mode.
Using the or

buttons, set the marker on the signal and press "ENTER".

The screen is shown in Fig.44.

Содержание SPIDER ST 301


























































































































Результаты поиска

Содержание SPIDER ST 301

Отзывы:

Похожие инструкции для SPIDER ST 301

Бренды по названию

Популярные бренды

ST Group SPIDER ST 301, Руководство пользователя

Результаты поиска

Содержание SPIDER ST 301

Отзывы:

Похожие инструкции для SPIDER ST 301

Бренды по названию

Популярные бренды