PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
46
JH131115
Edit a step
When the operator touches a step button on the selection list, step parameters will
be shown on parameter screen to allow editing.
Function of delete button
(8)
will change to delete step allowing to remove the
current step selected.
A selection bar will appear on top of parameter screen to allow visualization of
multiple parameter pages. SPIN150I have only 2 pages: spin and dispense,
depending on the configuration of the system additional pages may be available.
Selecting each page, following parameters will be available
Spin parameters
The spin page contains the following parameters:
Time for the step to spin.
Motor spinning direction: Clockwise, counter
clockwise
Spin speed: between 0 and 12.000rpm,
depending of the chuck
Spin acceleration: between 0 and 51.270 rpm/s,
depending of the chuck
If the spin direction selected
is “puddle”, the spin speed and acceleration fields
are replaced by:
Duration of puddling in milliseconds
Amplitude of the puddling in degree considering
movement from centre position.
I.e. 90 will perform 90° movement clockwise,
return to 0 position, 90° counter clockwise and
return to 0 position in selected period.
