PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
26
JH131115
WARNING!
Please read completely the manual, containing required safety instructions,
carefully prior to installation of the unit.
6.2 Unpacking
Check the package and contents upon unpacking for damages during transport.
In case of transport damages or damages in transit, please contact the
manufacturer immediately.
Unpacking should be performed in a suitable, dust-free and air-conditioned
environment.
Verify receipt of all parts based on content list provided in relative section.
In case of missing parts, please refer to the manufacturer.
All package material has to be stored for use if further shipment is required.
6.3 Installation site
The
Polos
spin processor will operate correctly under following conditions:
1. clean rooms and laboratory
2. ambient tempe 15°C to + 25°C
3. ambient relative humidity max. 60%, no condensation.
CAUTION!
Before installing the system keep it for at least 24 hours under approved operating
condition
CAUTION!
The system may only be placed on a stable, flat, vibration-free and safe surface not
to be deformed under the weight of the unit and eventual accessories (see
Technical data section).
DANGER!
Explosive atmosphere
!
Do not apply any explosive chemicals.
Do not operate the system in explosive atmosphere.
DANGER!
Do not operate without suitable drain.
