PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
55
JH131115
4. Parameter value
5. Parameter min and max limit
6. End button(return to home screen)
7. Refresh
8. Save
9. Manual mode
10. Service access
11. Save log
Select the desired parameter group touching relative group selection icon in order to
show contained parameters.
Parameters value can be edited clicking relative value field. An input window will
appear, insert desired value and click “OK”
button to accept; click on
“CANCEL” button to exit the prompt screen without modifying relative parameter
value.
Acceptable values must be between the min/max values as indicated in relative
column.
Note:
Any parameters modification required but not listed in this manual should
only
be done by
SPS-Europe B.V.
service or by persons of equivalent qualification.
DANGER!
Important:
Test the values of parameter in a test environment without fluids to
make sure that program and system parameters are correct. Otherwise system may
be damaged
CAUTION!
To get experience with the system, it is
STRONLGY
recommended to test the unit
with DI water first ONLY before use it with chemicals.
