PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
36
JH131115
7.7 Creating a recipe
All relative information about recipes creation could be found in the relative chapter
of spin processor software.
DANGER!
When using chemicals, please observe that released chemicals may react with
each another, leading to unwanted and unknown reactions. These substances may
bear major additional risks. It is the responsibility of the user to prevent chemical
mixing.
Note
: if various chemicals have to be dispensed inside the spin processor chamber,
a rinse cycle is required to remove chemicals residual before dispensing a different
chemical.
System is preconfigured with different preset recipes to be used as example; list of
preset recipes is provided in appendix.
Additional recipes can be downloaded from our website
CAUTION!
Some recipes are designed for specific unit that may not match to actual unit setup
and therefore are not suitable to be used.
Note:
please refer to
appendixes, drawings and the section technical data
for
details or contact
SPS-Europe B.V.
in case of uncertainty.
7.8 Starting a recipe
All relative information about starting recipes could be found in the relative section
of spin processor software documentation.
7.9 Switching off
Assure that the unit is in idle mode and no process is currently running.
Turn the main switch
(1)
of the unit to <1>.
Close the lid and leave the house exhaust system, if available, activated to avoid
condensation and ensure proper ventilation and gases extraction.
Assure the drainage system, if available, is connected and properly working; leave it
connected even while unit is powered off.
