PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
11
JH131115
3
Specific safety instruction
3.1 System safety alarms
Depending on your system configuration one or more of following safety alarm
could be present on your system.
Interface indicators:
Unit interface provide indication, warning and alarm useful for safe utilization of the
unit.
In case of error a Warning symbol will appear on screen.
Clicking on this warning symbol, a log file will be prompted to provide detailed
information about the reason of the alarm.
CAUTION!
Above mentioned interface indicators must be observed before system start up as
well as during all process time.
WARNING!
Available indicators must be known by all personeel operating with the system.
3.2 Safety devices
Depending on your system configuration one or more of following safety device
could be present on your system:
Lid closure sensor
Lid lock sensor
Vacuum pressure sensor
Motor over-temperature sensor
External sensor(s)
Process will be interrupted in case of one or more safety device will trigger to alarm
state.
Description and location of safety devices indicated above are provided in relative
chapter of this manual.
Our products are continuously modified and improved due to innovation, legal
requirements and standards. As a consequence, the information given in this
documentation may not accurately reflect every detail of the system actually
delivered.
Note:
please refer to
appendixes, drawings and section technical data
for
details or contact
SPS-Europe B.V.
in case of uncertainty.
