PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
20
JH131115
4
Transportation and storage
4.1 Safety indication
DANGER!
Prior to operate with the unit, the installation and operating instructions have to be
thoroughly read and observed.
CAUTION!
Heavy weights
Parts included could be heavy and have to be handled properly.
4.2 Transportation
DANGER!
An overturning unit may cause serious injuries.
During transport tipping forces of the unit including its packaging have to be
considered.
CAUTION!
Before moving the
Polos
attention has to be paid that the unit is adapted to ambient
temperature. Due to alteration to temperature during transport unwanted length
modification may occur.
Keep the system for at least 24 hours under approved operating condition to make
the unit adapting to ambient temperature.
4.3 Storage
The system can be stored safely under following conditions:
without any liquids (process chemicals etc.)
ambient temperature - 10°C to + 60°C
ambient relative humidity max. 80%, no condensation
dust-free and protected (eventually packed up)
When removing from storage, prior to installation, keep the system for at least 24
hours under approved operating conditions.
System start up have to be performed by
SPS-Europe B.V.
service personnel or
persons qualified accordingly.
