18
PT
CS
ES
FR
DE
EN
IT
PARTS
DESCRIPTION AND MATERIALS
300
series
4
3
5
2
1
1 Support feet
Made of steel and attached to the frame, these keep the stretcher raised from the ground.
2 Support canvas
Made of PVC, this is the part used to support the patient.
3 Joint points
These are used to fold the stretcher.
4 Backrest adjustment rack
Used to adjust the backrest to several tilt positions.
5
Supports on wheels
Made of steel and attached to the frame, these are complete with wheels to facilitate small movements
on the ground. These keep the stretcher raised from the ground together with the support feet.
PARTS
DESCRIPTION AND MATERIALS
Slim
series
4
3
2
1
1
Supports on wheels
Made of steel and attached to the frame, these are complete with wheels to facilitate small movements
on the ground. These keep the stretcher raised from the ground together with the support feet.
These are foldable on Slim series stretchers.
2 Support canvas
Made of PVC, this is the part used to support the patient.
3 Joint points
These are used to fold the stretcher.
4
Support feet
Made of steel and attached to the frame, these keep the stretcher raised from the ground.
These are foldable on this type of stretcher.
PARTS
DESCRIPTION AND MATERIALS
Stock
series
3
2
1
1 Support canvas
Made of PVC, this is the part used to support the patient.
2
Supports
Made of steel and attached to the frame through welding, these keep the stretcher raised from the
ground.
They also act as a guide when you want to stack several stretchers.
3
Backrest adjustment rack
Used to adjust the backrest to several tilt positions.
Not present on model 270.
PARTS
516
15
12
17
18
16
19
9
1
11
10
2
14
6
4
5
7
3
8
13
DESCRIPTION AND MATERIALS
1
Reclining sidebars
Made of aluminium, steel and nylon and installed on the 506 stretcher,
these allow the patient to be held laterally.
11
Support wheels
Made of TPU and Nylon, these allow the trolley to be slid with the legs
closed onto the board on which it is loaded.
2
Trendelenburg/Fowler (or Treendelenburg) lever
Made of steel, positions the patient bed in the respective position.
12
Front wheels
Made of polyurethane, these allow the trolley to slide over the ground.
3
Feet side patient bed
Made of polyethylene, equipped with footrests.
13
Trolley knobs
Made of steel and fitted with a rubber knob, these are used to grip the
trolley for lifting.
4
Telescopic stretcher handle
Made of steel and equipped with a rubber knob, these are used to grip
the stretcher for lifting.
14
Leg locking hooks
Made of steel, they are part of the locking system described in point 7.
5
Stretcher release control
Made of steel, if pulled this releases the stretcher from the trolley.
15
Loading trolley
Made of steel and adjustable, it rests on the loading surface and supports
the stretcher when the front leg is closed.
6
Rear leg unlocking lever
Made of plastic-coated steel, unlocks rear leg movement.
16
Stretcher wheels
Made of TPU and Nylon, these allow the stretcher to slide on the ground
and are the part that rests on the trolley when the trolley and stretcher
are coupled.
7
Leg Lock Control
Made of steel, when operated with the legs in the closed position, it
keeps the legs in this position.
17
Stretcher crossbars
Made of steel, it allows coupling with the trolley.