Spedo 2600, Руководство по обслуживанию

Страница: 16 / 55

16 - Spedo 2600 Service Manual SP 007 011
Section 1c – Edge Trimmer Unit rebuild (continued)
1. Remove the lower edge trimmer blade. (Fig. 1) This blade has two cutting faces. If one face
is good, turn the blade so that the good face is to the inside. (Fig. 2)
2. Remove the friction hub, (Fig. 3) and the pressure springs. (Fig. 4) Then refit the friction
hub, (Fig. 5) this will give you something to hold as you undo the upper edge trimmer
blade. (Fig. 6)
WARNING Hold the blade as shown, failing to do so may result in
injury.
3. Replace the upper blade. Always fit a new upper blade if you either turn, or replace the
lower blade (Fig. 7)
4. Apply a small amount of light machine oil to the upper hub wick. (Fig. 8)
5. Refit the springs and friction hub to the upper hub. (Fig. 9)
6. Apply HMP grease to the bearing surface of the lower hub. (Fig. 10)
7. Refit the lower hub and lower hub retainer. (Fig. 11 & 12)
8. Apply HMP grease to the upper hub axle. (Fig. 13)
17 18
19 20
21 22