Spedo 2600, Руководство по обслуживанию

Страница: 10 / 55

10 - Spedo 2600 Service Manual SP 007 011
Operator Maintenance procedures (continued)
2. With a soft hair bush, remove any compressed paper dust build-up on the drive wheel.
(Fig. 2) If the build-up of dust is so compressed that a soft hair brush alone will not
remove it, you can use a soft grade brass wire brush.
NOTE: Do not use a steel wire
bush or any form of abrasive to clean the drive wheel surface.
3. Remove, and lubricate the edge trimmer oil wicks (one per edge trimmer) with light
machine oil. Refit the oil wicks once oil has soaked in. (Fig. 3) NOTE: Do not over oil
the wicks as this may cause marks on the edges of the forms.
4. Lubricate the drive wheel drive shaft bush. We recommend using light machine oil, in an
aerosol form to ease application. (Fig. 4)
5. Remove the blade guard. (Fig. 5) WARNING Exposed blades proceed with caution.
6. Loosen the two grub screws which retain the pressure head mount plate, (Fig. 6) and lift
the assembly clear of the machine.
7. Apply only one drop of light machine oil into each of the oil channels on the blade guide.
(Fig. 7) NOTE: Do not over oil the guide as this may cause marks on the end of the
forms.
8. Remove the fan filter, (Fig. 8) and clean using a vacuum cleaner. WARNING Do not
immerse the filter in water to clean.