Spedo 2600, Руководство по обслуживанию

Страница: 23 / 55

23 - Spedo 2600 Service Manual SP 007 011
Section 3a – Cross cut blade guard removal (continued)
1. Remove the blade guard (Fig. 1)
WARNING Exposed blades, proceed with caution.
Shown with anti-static option fitted this will not affect the procedure.
2. Remove the safety cover gas strut circlip. (Fig. 2) WARNING Safety goggles must be
worn when removing circlips.
3. Disengage the gas strut from the safety cover bar. (Fig. 3) WARNING Support the safety
cover when removing the gas strut to prevent the cover slamming shut.
4. Close the safety cover and remove the two retaining bolts. You can now lift the cover clear
of the machine. (Fig. 4)
5. Loosen the two grub screws which hold the kick-out roller pressure head mount plate. Then
lift clear of the machine. This will reveal the blade guide. (Fig. 5)
6. Remove the service doors both ends. (Fig. 6)
Section 3b – Cross cut blade removal
WARNING The following sections involve handling extremely sharp blades. Protective gloves
must be worn at all times. Extremely high risk of serious injury.
1 2
3 4
5 6