Spedo 2600, Руководство по обслуживанию

Страница: 14 / 55

14 - Spedo 2600 Service Manual SP 007 011
Section 1b – Edge Trimmer Unit strip (continued)
4. Once the eccentric bush and spring have been removed, you are able to see the upper hub
axle. (Fig. 7)
5. The axle is removed by pushing it out from the opposite end. You may have to apply a
small amount of pressure, using a pin punch. (Fig. 8)
6. Once the end of the axle is exposed you will be able to remove it from the edge trimmer
unit. (Fig. 9) WARNING The upper hub is no longer retained and may fall out.
7. Carefully remove the upper hub. (Fig. 10)
8. Remove the lower hub retainer and carefully remove the hub. (Fig. 11) You may need to
apply a small amount of pressure to the drive edge of the lower hub. (Fig. 12)
9. Apply a small amount of light machine oil to the blade wick. (Fig. 13)
10. Remove any dust build up in the casting with a soft hair brush, or airline. (Fig. 14)
Section 1c – Edge Trimmer Unit rebuild
1 2
3 4
5 6