Spedo 2600, Руководство по обслуживанию

Страница: 50 / 55

50 - Spedo 2600 Service Manual SP 007 011
Section 6b – OMR sensor set up (continued)
1. Remove both the service doors. (Fig. 1)
2. Connect the mains power and switch the machine on. (Fig. 5) WARNING Although
power to the logic unit, motors and drivers will be cut with the doors removed, the
power distribution box will still be live. PROCEED WITH CAUTION.
3. The OMR sensor should now be illuminated. (Fig. 3)
4. Rotate the blade timing pulley anti-clockwise to drive the blade downward (Fig. 4) until the
upper and lower cross cut blades overlap.
5. Using a steel rule, measure from the back of the upper cross cut blade, (Fig. 5) to the
illuminated mark from the OMR sensor. (Fig. 6) The measurement should be 14 ½” (+/-
1/16”).
6. This measurement must be repeated with the OMR sensor positioned at the far left (Fig. 3)
and far right (Fig. 7) of its adjustment.
3 4
5 6
7 8