manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Руководство по эксплуатации

Поделиться
Скачать
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Скачать руководство пользователя страница 41

2-8

 

MiniCapt® Mobile Operations Manual

Chapter 2

 :  Unpacking and Installation

Installation

Charge the Battery

It is recommended to charge the unit for at least 4 hours before the first use.

The system operates off the battery for normal operations and will charge the battery 
when connected to main power through the AC/DC power supply. If main power is 
connected the unit will run off main power.

NOTE:

If the battery is not sufficiently charged, the system may 
shutdown unless connected to AC power.

>> To charge the battery:

1.

Install the battery as described on page 2-5.

2.

Connect the power supply cord to Mains power and to the MiniCapt as 
described on page 2-6.

3.

Turn on the MiniCapt as described on page 2-7.

4.

Note the time of day so you will know when the MiniCapt has been connected 
to mains power for at least 4 hours.

Содержание PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды