manualshive.com logo in svg

Spectris PARTICLE MEASURING SYSTEMS MiniCapt, Руководство по эксплуатации

Поделиться
Скачать
Spectris PARTICLE MEASURING SYSTEMS MiniCapt Скачать руководство пользователя страница 3

ii 

MiniCapt® Mobile Operations Manual

MiniCapt

®

 Mobile Microbial Air Sampler Operations Manual

P/N 1000020872 Rev M

© 2020 Particle Measuring Systems, Inc.

All rights reserved.
BioCapt

®

 and MiniCapt

® 

are registered trademarks of Particle Measuring Systems.

All trademarks appearing in this manual are the property of their respective owners. 

DO NOT REPRODUCE OR DISTRIBUTE

CONFIDENTIAL DOCUMENT

This confidential document contains proprietary information, which is protected by 
copyright. All rights are reserved. No part of this document may be reproduced, 
distributed, or transmitted in any form without the prior written consent of Particle 
Measuring Systems. The information contained in this document is subject to change 
without notice.

Quality Statement

The Quality Policy of Particle Measuring Systems is to strive to meet or exceed the 
needs and expectations of our customers, and to align the activities of all employees 
with the common focus of customer satisfaction through continuous improvement in 
the quality of our products and services.

Environmental Information

There are no potential means by which asbestos exposure is possible because there 
are no materials in the design or manufacture of the MiniCapt® Mobile Microbial Air 
Sampler containing asbestos.

This equipment must be properly disposed of at end-of-life by means of an 
authorized waste management system. Contact our Customer Response 
Center at (877) 475-3317 or (303) 443-7100 (International Tel01 
3034437100) for dismantling and disposal information. 

Battery Disposal

Lithium ion batteries are classified by the U.S. federal government as non-hazardous 
waste and are safe for disposal in the normal municipal waste stream. Lithium ion 
batteries contain recyclable materials and are accepted by some of regional recycling 
programs.
Particle Measuring Systems, Inc. encourages users to check with their local 
municipality for lithium ion battery recycling. In North America, contact the 
Rechargeable Battery Recycling Corporation (RBRC) at www.rbrc.org. In Europe, 
contact the European Portable Battery Association. (EPBA) www.epbaeurope.org.
For California consumers, contact Particle Measuring Systems, Customer Service 
Department at (877)-475-3317 for instructions on returning used, rechargeable 
batteries for reuse, recycling, or proper disposal at no cost.

Содержание PARTICLE MEASURING SYSTEMS MiniCapt


























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды