Turning On/Off the laser
Press the power button to turn On/Off the laser.
–
Depending on the setup (horizontal or vertical) and if a grade value has been dialed in, the
unit starts the temperature/reference check while the thermometer symbol is flashing.
–
If there occur additional vibrations at the jobsite during the
reference check, the leveling time can be increased.
When the temperature/reference check has been finished, the standard display appears and the
bubble symbols flash until self-leveling has been completed.
Don’t start a menu function before the reference check has been finished.
If the self-leveling
can’t be finished based on the selected sensitivity, an error message appears
A
bubble symbol
helps to adjust the unit at the
cross axis
when
set up vertical for automatic Spot Align or in vertical manual mode.
Turning On/Off the Laser
